The GapGun product range
Accessories
A range of accessories and spares are available for GapGun systems.
- Existing GapGun users can buy these from the online GapGun accessories store.
 |
GapGun3 WIFI Waistpack
GapGun3 wifi waist pack
Product code: GG05019 |
|
 |
GapGun battery for Wireless GapGun systems
Removable LiIon battery for use in GapGun wireless systems. Typical run time is 6 hours of continuous measurement. Charge time is approximately 2 hours.
Product code: GG05020 Enquire about this product
|
|
 |
Battery charger for use with GapGun wireless systems (US power cord)
Intelligent battery charger for charging of batteries supplied with GapGun wireless systems. Includes calibration function to ensure battery performance is maximised.
Supplied with US style AC power connector. Product code: GG05022/US Enquire about this product
|
|
 |
Battery charger for use with GapGun wireless systems (EU power cord)
Intelligent battery charger for charging of batteries supplied with GapGun wireless systems. Includes calibration function to ensure battery performance is maximised.
Supplied with EU style AC power connector. Product code: GG05022/EU Enquire about this product
|
|
 |
Battery charger for use with GapGun wireless systems (UK power cord)
Intelligent battery charger for charging of batteries supplied with GapGun wireless systems. Includes calibration function to ensure battery performance is maximised.
Supplied with UK style AC power connector. Product code: GG05022/UK Enquire about this product
|
|
 |
GapGun heavy duty carry/storage case
Heavy duty flight grade storage case for GapGun systems with DCX3 type data collector. Includes machined insert that safely and easily houses all components supplied with a GapGun wireless system.
Product code: GG04025 Enquire about this product
|
|
 |
Soft rubber standoff for measurement of gap and flush
A standoff to simplify the measurement of gap and flush, suitable for FOV40 and FOV15 type measurement heads. Typically used in environments where there are large numbers of measurements collected to increase speed and comfort for the operator.
Constructed from a softened yet durable rubber to ensure that automotive paintwork is unaffected.
Product code: GG05017/SOFT Enquire about this product
|
|
 |
Soft rubber standoff for sealant and weld measurement
A standoff to simplify the measurement of weld and seal profiles, suitable for FOV40 and FOV15 type measurement heads. Constructed from a softened yet durable rubber to ensure that automotive paintwork is unaffected.
Product code: GG05017/H Enquire about this product
|
|
 |
Edge measurement standoff for FOV7 GapGun sensors
Standoff for use with FOV7 measurement sensors. Designed to be used for general measurement and optimised for break sharp edge (BSE) type measurements. Note: This standoff type is customised to your specific head geometry and is specially machined accordingly.
Product code: GG05017/25M Enquire about this product
|
|
 |
GapGun DCX3 Belt clip
Belt clip for use with DCX3 type GapGun data collectors (handle style). Allows the GapGun to be easily clipped to an operators belt, allowing both hands to be free whilst roaming with GapGun.
Product code: GG07035 Enquire about this product
|
|
 |
GapGun holster
Protective holster and belt used to store GapGun. Can be used instead of GG07035 belt clip.
Product code: GG090101 Enquire about this product
|
|
 |
Head extension lead
GapGun measurement head extension lead. Allows GapGun data collector and measurement sensor to be detached from each other and operated separately. Allows measurements in areas with restricted access easily where measurements would otherwise prove impossible.
Important note: older heads from 2002-2005 with head serial numbers containing digits 'C9827' require alternate part GG07031-C9827/2 which is not available from the web shop. Product code: GG07031/2 Enquire about this product
|
|
 |
Head extension lead (2005 and earlier heads)
GapGun measurement head extension lead for older head types (manufactured ~2005 and earlier, with serial numbers containing the digits C9827). See standard head extension lead GG07031 for more information on head extension leads.
Product code: GG07031-C9827/2 Enquire about this product
|
|
 |
GapGun to waistpack cable
A heavy duty coiled cable used to connect a waistpack to a data collector on Wireless GapGun systems. Constructed from heavy duty and fully shielded cable to ensure durability in even the most demanding environments.
Product code: GG05023 Enquire about this product
|
|
 |
Glass preparation kit
Glass preparation marker kit, including black and white application pens of two different thicknesses and cleaning cloth. A total of 8 pens. Apply to transparent surfaces prior to measuring, easily wipes off with a dry cloth (supplied) after measuring.
Product code: GG090100 Enquire about this product
|
|
 |
Mismatch measurement standoff
Standoff which allows rapid measurement of machining mismatches in conjunction with FOV7 GapGun sensor heads. Typical sigma value is 4 microns or 0.0002" Tolerances of +/-0.090mm or +/-0.004" are measurable to six-sigma specification (Cg and Cgk>1.333).
Product code: GG08095 |
|
